Blue Coat Proxy SG

For this procedure you will be using the Command Line Interface (CLI) of your Blue Coat Proxy SG device using an SSH client (such as OpenSSH or Putty), Telnet or through the console port. We would recommend using either SSH (for remote connections) or using a direct connection to the console port. Telnet provides no encryption of the communications and therefore your authentication credentials and configuration would be vulnerable if a malicious user were to monitor your connection.

Connect to the Blue Coat Proxy SG using your favorite SSH client, Telnet or a direct console connection.
Logon using your administration authentication credentials.
Execute the following CLI command and capture the output (possibly using the cut and paste facility):
Copy
```
show configuration
```

Save the captured output to a file and remove any visible page lines (i.e. --More--).